Randall tiled fireplace insert

We make Fireplaces from 1920s Art Deco fireplaces and classic Edwardian fireplace and mantel designs.
This tiled fireplace insert can be seen as a copy in tiles of the cast iron type of insert. It would usually feature exactly the same four or five tile runs of tiles as these fireplaces (angling forward from either side of the fireplace opening). This fireplace design became popular in the late 1970s and was a response by the still strong slabbing industry to the revival in the popularity of the black cast iron fireplace inserts. The example shown here is in burgundy tiles, but they were typically black to mimick the cast iron except for the feature tiles and often had a rope twist embossed line in the hearth. By incorporating different feature tiles of your choice you can customise this design to suit a range of décor from late Victorian to contemporary styles
Plain Tiles
£1 290.00

included and extra items

The above price is inclusive of a standard sized hearth. The hearth can be made to any size or shape, depending on the installation requirements.
The sizes given are for those fireplaces pictured here, but we do manufacture completely to order, and would make a fireplace for you at any reasonable size requested. Price will vary with size. As a rough guide, to increase the width of a fireplace by up to 4 inches will require £45 extra of tiles (plain tiles), to increase width of a fireplace by 5 to 8 inches will require £90 of extra tiles (plain tiles). To add 2 extra shoulders to an all tiled fireplace will add £190 to the cost of a fireplace.
A 16 inch fire-back for gas use is available for this fireplace. It is made from ceramic fibre and will increase the efficiency of our decorative gas fires. It is NOT suitable for use with solid fuel.
A "living flame" gas fire is a decorative fuel effect gas fire, designed to be used with a 16 inch ceramic fibre gas fireback. They are low efficiency, with a heat output of about 2 kW, but they have real flames.
Solid Fuel Kit - grate and ashpan for solid fuel use
A 16 inch fire-back for solid fuel is available, made from fired clay.
A standard N fret is available for this fireplace in matt black (other frets are also available ) http://www.c20fireplaces.co.uk/parts/simple-solid-fuel-kits
Other frets are available - see www.ashpanworld.co.uk

Vertical Tabs


40.00 inches

Body Width

42.00 inches

Opening Height

22.00 inches

Opening Width

16.00 inches
Randall Fireplace Frieze
Randall Fireplace with a mantel
Randall Fireplace frieze with a mantel