Craddock Art Deco tiled fireplace insert

We make Fireplaces from 1920s Art Deco fireplaces and classic Edwardian fireplace and mantel designs.
This striking stylised sunburst design is typical of much of the Art Deco influenced domestic design from the 1920s and 1930s. Designs like these are prominent in the detailing of suburban semi-detached housing from the inter-war period. Fireplaces such as these, with a separate mantel were to be found in the most inter-war homes. Typically a fireplace with a separate mantel (usually oak or mahogany) was found in the front parlour and an all-tiled fireplace located in the more "everyday" room in the house. This period 1902s fireplace design has proved equally popular both as a fireplace insert and an all-tiled fireplace. As usual the Craddock can be made in any of our colour combinations. As each fireplace insert is made to order, it is simple for us to make it to fit your own original mantel if you have one.
Plain Tiles
£1 150.00
Plain Tiles

included and extra items

The above price is inclusive of a standard sized hearth. The hearth can be made to any size or shape, depending on the installation requirements.
The sizes given are for those fireplaces pictured here, but we do manufacture completely to order, and would make a fireplace for you at any reasonable size requested. Price will vary with size. As a rough guide, to increase the width of a fireplace by up to 4 inches will require £45 extra of tiles (plain tiles), to increase width of a fireplace by 5 to 8 inches will require £90 of extra tiles (plain tiles). To add 2 extra shoulders to an all tiled fireplace will add £190 to the cost of a fireplace.
A 16 inch fire-back for gas use is available for this fireplace. It is made from ceramic fibre and will increase the efficiency of our decorative gas fires. It is NOT suitable for use with solid fuel.
A "living flame" gas fire is a decorative fuel effect gas fire, designed to be used with a 16 inch ceramic fibre gas fireback. They are low efficiency, with a heat output of about 2 kW, but they have real flames.
A 16 inch fire-back for solid fuel is available, made from fired clay.
Solid Fuel Kit - grate and ashpan for solid fuel use
A standard N fret is available for this fireplace in matt black (other frets are also available )
Other frets are available - see

Vertical Tabs


40.00 inches

Body Width

40.00 inches

Opening Height

22.00 inches

Opening Width

16.00 inches
Craddock Fireplace and Teardrop Mantel