Albemarle Art Deco fireplace insert

We make Fireplaces from 1920s Art Deco fireplaces and classic Edwardian fireplace and mantel designs.
This tiled fireplace insert has definite elements of ziggurat type design influences. These features of Art Deco design found their way easily into domestic fireplaces in the 1920s and 1930s Tiles were eminently amenable to the construction of these linear stepped forms. It is a lot easier to cut a tile in a straight line than a curve. Stepped fireplace designs of this type were common until at least the late 1940s. This Art Deco inspired fireplace insert was designed by two of our customers for their own 1920s home. We have remade it in a large number of colour varaitions. We can and do produce bespoke designs for customers, often taking patterns and themes from existing Art Deco features and translating them into tile designs for a fireplace. As long as the degree of difficulty in manufacture is similar to that of our existing designs, we do not usually charge extra for this service.
Plain Tiles
£1 150.00

included and extra items

The above price is inclusive of a standard sized hearth. The hearth can be made to any size or shape, depending on the installation requirements.
The sizes given are for those fireplaces pictured here, but we do manufacture completely to order, and would make a fireplace for you at any reasonable size requested. Price will vary with size. As a rough guide, to increase the width of a fireplace by up to 4 inches will require £45 extra of tiles (plain tiles), to increase width of a fireplace by 5 to 8 inches will require £90 of extra tiles (plain tiles). To add 2 extra shoulders to an all tiled fireplace will add £190 to the cost of a fireplace.
A 16 inch fire-back for gas use is available for this fireplace. It is made from ceramic fibre and will increase the efficiency of our decorative gas fires. It is NOT suitable for use with solid fuel.
A "living flame" gas fire is a decorative fuel effect gas fire, designed to be used with a 16 inch ceramic fibre gas fireback. They are low efficiency, with a heat output of about 2 kW, but they have real flames.
A 16 inch fire-back for solid fuel is available, made from fired clay.
Solid Fuel Kit - grate and ashpan for solid fuel use
A standard N fret is available for this fireplace in matt black (other frets are also available )
Other frets are available - see

Vertical Tabs


40.00 inches

Body Width

40.00 inches

Opening Height

22.00 inches

Opening Width

16.00 inches