Cunningham

We make Fireplaces from 1920s Art Deco fireplaces and classic Edwardian fireplace and mantel designs.

This tiled fireplace is a reproduction of the simpler tiled fireplaces that were mass produced in the middle of the 20th century.

It would typically have been installed in the semi-detached period homes built just after the first world war, throughout the 1950s and 1960s.

The fireplace shown is in Ivory and Grey, but we can produce this fireplace in any of the colours shown below, with the exception of some of the mottled ones.
The background colour is lifted by the stronger coloured front of the hearth and sloping shelf.

The hearth has this sloping "Clean - easy" front that was typical of post - war fireplaces, and this feature is reproduced as the top shelf of the main body of the fireplace.

The fireplace opening has a simple 1 inch wide stainless steel trim, and a matching heatplate in the hearth for use with solid fuel. This versatile fireplace can by virtue of its flat front area be used for inset stoves or almost any gas or electric fire.

Plain Tiles
£1 075.00

included and extra items

A 16 inch fire-back for solid fuel is available, made from fired clay.

£60.00

Solid Fuel Kit - grate and ashpan for solid fuel use

£45.00

A 16 inch fire-back for gas use is available for this fireplace. It is made from ceramic fibre and will increase the efficiency of our decorative gas fires.
It is NOT suitable for use with solid fuel.

£60.00

A "living flame" gas fire is a decorative fuel effect gas fire, designed to be used with a 16 inch ceramic fibre gas fireback.
They are low efficiency, with a heat output of about 2 kW, but they have real flames.

£195.00

Vertical Tabs

Height

36.50 inches

Body Width

49.25 inches

Opening Height

22.00 inches

Opening Width

16.00 inches

Overall Depth

19.00 inches

Hearth Width

48.50 inches

Hearth Depth

15.00 inches